The purpose of storage and maintenance is to prevent the
Throttle Valve from being damaged or reducing its quality during storage. In fact, improper storage is one of the important reasons for the damage of Throttle Valve.
The storage of Throttle Valve should be well organized. Small Throttle Valve should be placed on the shelves, and large Throttle Valve can be neatly placed on the floor of the warehouse. They should not be piled up randomly, and the flange connection surface should not be directly in contact with the ground. This is not only for aesthetics, but more importantly, to protect the Throttle Valve from being damaged. Due to improper storage or handling, the hand wheel is broken, the
Valve Stem is crooked, and the fixing nut of the hand wheel and the valve stem is loosened and lost. These unnecessary losses should be avoided.
For Throttle Valve that are not used in the short term, the asbestos packing should be removed to avoid electrochemical corrosion and damage to the valve stem.
The inlet and outlet of the Throttle Valve should be sealed with wax paper or plastic sheets to prevent dirt from entering and affecting the Throttle Valve.
For Throttle Valve that can rust in the atmosphere, anti-rust oil should be applied to protect them and prevent rust.
Throttle Valve placed outdoors must be covered with rainproof and dustproof items such as tarpaulin or tarpaulin. The warehouse where the Throttle Valve are stored must be kept clean and dry.
