Ball Valve are frequently used in industrial production. This type of Ball Valve has the advantages of high cost performance, wide range of action, and good safety assurance. In the process of large-scale and long-term use, Ball Valve will inevitably have some large and small faults. Let's take a look at how these faults should be handled?
The faults that often occur on this type of Ball Valve can often be divided into two categories. The first common fault is Ball Valve leakage. Once there is a leakage problem, you need to stop the operation of the entire machine immediately, and effectively find out the cause of the leakage of the Ball Valve and solve it accordingly.
Generally speaking, the problem of leakage usually occurs because some parts in the Ball Valve have poor contact with the base, there is a gap in the middle, or some impurities in the production process run into the Ball Valve, causing obstructions and gaps, so as long as the cause of the problem is found, it can generally be easily solved by the staff.
Another type of problem is that the Ball Valve does not work, that is, when the valve set pressure value is reached, the Ball Valve does not open automatically. There are usually more cases like this. For example, some may be that the Ball Valve has been used for too long, and the valve core and the valve seat may be stuck together due to oil pollution and other problems, so it cannot work.
It may also be a problem with the settings above. The spring pressure value inside the Ball Valve is adjusted too large, which makes its sensing valve value relatively high, so it cannot sense normally. For this kind of problem, it is best to ask professional maintenance personnel to detect and find it, and carry out targeted repairs to restore it to normal.
